Basement Waterproofing Photo Album: Foundation Repair Installation in Somerdale New Jersey

Residential renovation, maintenance, and preservation company Resipro undertook the job of completely restoring this home to be rented out to new tenants. Of the various project panned for the home, the basement was experiencing severe water and foundation issues that made the property hazardous to occupy. Team Dry Guys Installed 16 PowerBrace Support I-Beams to stabilize this failing foundation. These I-beams are mounted in a way that freezes inward wall movement permanently. With the addition of our TripleSafe Sump Pump System and vapor barrier, this basement is now safer and much more appealing than before.

The Somerdale House Before

Wall cracks and water were apparent throughout the entire basement. Every wall required support and the ground had deteriorated from the persistent water intrusion.

PowerBrace Assembly

Our team fitting the brace to the wall to see where things will line up.

PowerBrace Assembly

The mounting bracket being fitted and marked before drilling holes.

PowerBrace Assembly

The brace and mount being attached.

The PowerBrack Wall System

The completed assembly.

The PowerBrace and Mount

The PowerBrace System is designed to stop the inward wall movement immediately. Over time, the system will be adjusted to bring the walls back to their original position.

Joist Runners

A metal runner is placed on the joist to improve the structural integrity of the system.

Alternate Assembly

Depending on what wall the PowerBrace is installed, a different style of mounting will be used. This setup sits in between the floor joists and mounts to two point to secure the system in place.