WaterGuard System in the Corner
The WaterGuard system laid on top of the footer and against the wall. The system is made to be cut and adapted to fit the perimeter of your basement.
Scott Sets the System
The WaterGuard system is installed along the wall. In the background, the new sump pump is visible.
System Under a Wall
The system is designed so it can pass under walls and into different rooms of the basement.
Another Room
View of the system set around the perimeter of a different room in the basement of the church.
Closeup of the WaterGuard System
The system is held together with a special tape that activates when dampened and forms a seal.
New Sump Pump
Picture of the patented TripleSafe sump pump as it is being installed.
Mixing Cement
Scott mixes cement to apply over the WaterGuard system.
Access Area
This part of the system has a removable cover so water can be fed directly into the system. This is great for a dehumidifier or other kinds of discharge lines.
Applying the New Cement
The crew covers over the system with a new layer of cement.
Cement Around the Sump
Cement is applied around the sump. The gravel underneath allows any water that may come ip through the ground to flow into the sump pump.